ISO IEC 11801-5:2017 pdf free
ISO IEC 11801-5:2017 pdf free.INFORMATION TECHNOLOGY – GENERIC CABLING FOR CUSTOMER PREMISES
For a cabling installation to conform to this document the fllowing applies.
a) The configuration and structure shall conform to the requirements outined in Clause 5.
b) Channels shall meet the requirements specified in Clause 6 when subjected to environment conditions, local to the channels (see NOTE below), as defined by the applicable environmental Class(es) of Clause 6.
This shall be achieved by one of the following:
1) a channel design and implementation ensuring that the prescribed channel performance of Clause 6 is met;
2) attachment of appropriate components to a permanent link or CP link design meeting the prescribed performance class of Clause 7. Channel performance shall be ensured where a channel is created by adding more than one cord to either end of a link meeting the requirements of Clause 7;
3) for E1 environments, using the reference implementations of Clause 8 and compatible cabling components conforming to the requirements of Clauses 9, 10, and 11, that is based upon a statistical approach of performance modelling.
c) The interfaces to the cabling at the EO shall conform to the requirements of Clause 10 with respect to mating interfaces and performance when subjected to environment conditions,local to the connecting hardware (see NOTE below),as defined by the applicable environmental Class(es) of Clause 6.
d) Connecting hardware at other places in the cabling structure shall meet the performance requirements specified in Clause 10 when subjected to environment conditions, local to the connecting hardware (see NOTE below)， as defined by the applicable environmental Class(es) of Clause 6.
2) The requirements of ISO/IEC 14763-2 and ISO/IEC 30129 shall be met.
This document does not specify which tests and sampling levels should be adopted. Test methods to assess conformance with the channel and link requirements of Clause 6 and Clause 7，respectively, are specified in ISO/IEC 11801-1. The test parameters to be measured, the sampling levels and the treatment of measured results to be applied for particular installation shall be defined in the installation specification and quality plan for that installation prepared in accordance with ISO/IEC 14763-2.
In the absence of the channel, the conformance of the link shall be used to verify conformance with ISO/IEC 11801-5.ISO IEC 11801-5 pdf download.
