Home>ISO Standards>ISO 5611-8:2015 pdf free

ISO 5611-8:2015 pdf free

ISO 5611-8:2015 pdf free.Cartridges, type A, for indexable inserts
This part of ISO 5611 applies for cartridges type A, with hole(s) for fastening screw(s), of style S, i.e.with cutting edge angle Kr = 45° for end cutting.
Cartridges are intended to be used with indexable inserts made of hard metal, ceramic, or other cutting materials and are primarily mounted to be used for internal turning of operations.
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 1832, Indexable inserts for cutting tools一Designation
ISO 5608, Turning and copying tool holders and cartridges for indexable inserts一Designation
ISO 5611-1, Cartridges, type A, for indexable inserts一Part 1: General survey, correlation and determination of dimensions
Cartridges type A need not comply with the pictorial representation, only the dimensions given shall be observed.
For determination of dimensions h1,f, and l, see ISO 5611-1. For explanation of the designation code for cartridges, see ISO 5608.
A cartridge in accordance with this part of ISO 5611 shall be designated by the following:
a) “Cartridge”;
b) reference of this part of ISO 5611, i.e. ISO 5611-8;
c) letter symbol identifying the method of holding the insert, in accordance with ISO 5608;
d) letter symbol identifying insert shape, in accordance with ISO 1832;
e) letter symbol identifying cartridge style, in accordance with ISO 5608;
f) letter symbol identifying insert normal clearance, in accordance with ISO 1832;
g) letter symbol identifying hand of cartridge, in accordance with ISO 5608;
h) number symbol identifying tool height (shank height of cartridges and height of cutting edge), in accordance with ISO 5608;
i) number symbol identifying tool holder shank width or, for cartridges, letter C followed by a letter symbol identifying the cartridge type, in accordance with ISO 5608;
i) letter symbol identifying tool length, in accordance with ISO 5608;
k) number symbol identifying indexable insert size, in accordance with ISO 1832.ISO 5611-8 pdf download.

Related standards