ISO 3691-3:2016 pdf free
ISO 3691-3:2016 pdf free.Industrial trucks一Safety requirements and verification
If an extended or supplementary platform as shown in Figures 2 to 4 is provided, it shall fulfil the requirements of 4.4.5.1 and shall be extended to encompass the whole area accessible to the operator and assistant if an assistant is permitted by design. If no supplementary platform is in place (see Figure 1), a mechanical guard as specified in 4.4.5.1 and 4.4.5.2 shall be in place between the operator’s platform and the load-handling device; alternatively, the operator’s platform shall be prevented from lifting above 1 200 mm.
The requirements for supplementary platforms equipped with a fall protection device are subject to regional requirements, additional to the requirements of this part of ISO 3691. See ISO/TS 3691-8.
For trucks intended by the manufacturer to be used with a defined walking surface, as shown in Eigure 4 means, which are part of the truck, shall be provided to join the walking surface by a positive engagement device to prevent overturning and shifting of that walking surface [see 6.2 f)]. Disposable pallets are not allowed.
If no defined walking surface is in place, a mechanical guard as specified in 4.4.5.1 and 4.4.5.2 shall be in place between the operator platform and the load-handling device or the platform shall be prevented from lifting above 1 200 mm.
A top rail omitting the intermediate rail and the toe board is sufficient at the opposite end of the operator’s platform.
Platforms equipped with a fall protection device are subject to regional requirements, additional to the requirements of this part of ISo 3691. See ISO/TS 3691-7 and ISO/TS 3691-8.
Anchorage point(s) of fall protection device(s) shall be capable of withstanding three consecutive drop tests of 135 kg falling a distance of 1 800 mm without failure of the anchorage point. If a second person is to use the same anchorage point, the test weight shall be 270 kg.
Anchorage points for fall protection is subject to regional requirements, additional to the requirements of this part of ISO 3691. See ISO/TS 3691-8.ISO 3691-3 pdf download.
