ISO 1832:2017 pdf free
ISO 1832:2017 pdf free.Indexable inserts for cutting tools一Designation
This document establishes a code for the designation of the usual types of indexable inserts for cutting tools in hard cutting materials or any other cutting materials, in order to simplify orders and specifications for such inserts.
It also specifies the designations for cubic boron nitride (BL, BH, BC) inserts, tipped and solid, as well as polycrystalline diamond (DP) inserts, tipped.
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 513, Classification and application of hard cutting materials for metal removal with defined cutting edges一Designation of the main groups and groups of application
ISO 3002-1, Basic quantities in cutting and grinding一Part 1: Geometry of the active part of cutting tools一General terms, reference systems, tool and working angles, chip breakers
ISO 16462, Cubic boron nitride inserts, tipped or solid一Dimensions, types
ISO 16463, Polycristalline diamond inserts, tipped一Dimensions, types
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
一IEC Electropedia: available at http://www.electropedia.org/
一ISO Online browsing platform: available at http://www.iso.org/obp
No addition to or extension of the designations specified in this document shall be made without consultation with ISO/TC 29 and without its agreement. Rather than adding symbols not provided for in this system, it is preferable to add all necessary explanations in the form of detailed sketches or specifications to the designation in accordance with this document.
However, if the letter symbol”X” is used in position 4 of the designation, it is allowed to use, in positions 5, 6 and 7, symbols representing values not ppearing in this document, but which shall be described explicitly using the sketch or the detailed specifications given in 5.4.ISO 1832 pdf download.