ISO 10889-4:2016 pdf free
ISO 10889-4:2016 pdf free.Tool holders with cylindrical shank一Type C with rectangular axial seat
This part of ISO 10889 specifies dimensions, designations and complementary technical delivery conditions for tool holders with a rectangular axial seat of types C1 to C4 with cylindrical shank in accordance with ISO 10889-1.
ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools,preferably for turning machines.
For non-standardized tool holders with rectangular axial seat, such as the tool holders shown in Figures 1 to 4, it is advisable to apply the corresponding specifications of this part of ISO 10889.
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 2768-1, General tolerances一Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
ISO 2768-2, General tolerances一Part 2: Geometrical tolerances for features without individual toleranceind ications
ISO 801 5, Geometrical product specifications (GPS)一Fundamentals一Concepts, principles and rules ISO 10889-1, Tool holders with cylindrical shank一Part 1: Cylindrical shank, location bore一Technical delivery conditions
All dimensions and tolerances are given in millimetres. Tolerancing is done according to ISO 8015.Tolerances not specified shall be of tolerance class“m”in accordance with ISO 2768-1 and of class“H”in accordance with ISO 2768-2.Unspecified details shall be chosen appropriately.
The dimensions of tool holders type C shall be in accordance with the dimensions shown in Figures 1 to 4 and given in Table 1.
The relationship between the symbols of this part of ISO 10889 and the symbols according to ISO 13399 is given in Annex A.
The tools shall be adjustable in the tool holder at right angles to the rectangular seat. The design is at the discretion of the manufacturer.
It shall be possible to reduce the dimension h1 specified in Table 1 to the next smallest standardized dimension h1 as given in Table 2. The design is at the discretion of the manufacturer.ISO 10889-4 pdf free download.
