BS ISO 19709-1:2016 pdf free
BS ISO 19709-1:2016 pdf free.Transport packaging一Small load container systems
This document specifies the essential characteristics and the common requirements and test methods for SLC systems used in the handling, transport and storage for the automotive industry. The application of such systems is described in Annex B.
These containers are based on the modular area 600 mm x 400 mm, 550 mm × 366 mm and 600 mm × 500 mm and subdivisions according to ISO 3394 and ISO 3676.
This document is designed to be read in conjunction with the particular part which specifies the chosen system.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 2234, Packaging一Complete, filled transport packages and unit loads一Stacking tests using a static load
ISO 2248, Packaging一Complete, flld transport packages一Vertical impact test by dropping
ISO 3676, Packaging一Complete, filled transport packages and unit loads一Unit load dimensions
IEC 61340-2-3, Electrostatics一Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
The user and the supplier shall agree that the operating temperature and the resistance to chemicals,e.g. acids, oils, coolants, brake fluids, and especially to washing agents, are compatible with the element material specified.
The SLC manufacturer shall ensure that any colouring agent used is compatible with the raw material.
NOTE Information on the use of colour as a means of identification is given in ISO/TS 19709-2 and ISO/TS 19709-3.
SLC manufacturers pledge to use only polypropylene copolymers for all SLC system elements in order to maintain consistent quality. The use of foamed plastics is prohibited.
This document does not cover test conditions for raw materials. However, the finished SLCs shall fulfil the quality and test requirements set out in this document.
The colour tolerances in delivered condition are checked by colour measurements. See ISO/TS 19709-2 and ISO/TS 19709-3 for details.
All plastics shall be UV-stabilized. See Annex C for details.
SLCs shall be able to withstand washing processes and cleaning agentsin accordance with the details provided in Annex C.BS ISO 19709-1 pdf download.
