Home>ISO Standards>BS ISO 13041-5:2015 pdf free

BS ISO 13041-5:2015 pdf free

BS ISO 13041-5:2015 pdf free.Test conditions for numerically controlled turning machines and turning centres
The sequence in which the kinematic tests are given in no way defines the practical order of testing.In order to make the mounting of instruments or gauging easier, tests can be performed in any order,including tests described in other parts of ISO 13041.
When testing a machine, it is not always necessary or possible to carry out all the tests given in this part of ISO 13041. When the tests are required for acceptance purposes, the choice of tests relating to the components and/or the properties of the machine of interest is at the discretion of the user, in agreement with the supplier/manufacturer. The tests to be used are to be clearly stated when ordering a machine. The mere reference to this part of ISO 13041 for the acceptance tests, without specifying the tests to be carried out, and without agreement on the relevant expenses, cannot be considered as binding for any contracting party.
The measuring instruments indicated in relation to the tests given in Annexes A to C are examples only. Other instruments measuring the same quantities and having at least the same measurement uncertainty and the same resolution can be used.
In some tests, it is recommended to present test results in a graphical form (see Annex D).
When builtin software facilities are available for compensating geometric, positioning, contouring,and/or thermal deviations, their use during these tests shall be based on agreement between manufacturer/supplier and user, with due consideration to the machine tool intended use.
When the software compensation is used, this shall be stated in the test reports. Using the definitions given in ISO/TR 16907, it shall be noted that when software compensation is used, axes shall not be locked for test purposes.
Tests in Annex A refer to horizontal workholding spindle machines (ISO 13041-1, Type 1), tests in Annex B refer to vertical workholding spindle machines (ISO 13041-2, Type 2), and tests in Annex C refer to inverted vertical workholding spindle machines (ISO 13041-3, Type 3).BS ISO 13041-5 pdf download.

Related standards