BS ISO 13006:2018 pdf free

BS ISO 13006:2018 pdf free.Ceramic tiles一Definitions, classification, characteristics and marking
This document defines terms and establishes classifications, characteristics and marking requirements for ceramic tiles of the best commercial quality (first quality). This document is not applicable to tiles made by other than normal processes of extrusion or dry pressing. It is not applicable to decorative accessories or trim such as edges, corners, skirting, capping, coves, beads, steps, curved tiles and other accessory pieces or mosaics (i.e. any piece that can fit into a square, the side of which is less than 7 cm).
NOTE ISO 10545 (all parts) describes the test procedures required to determine the product characteristics listed in this document. ISO 10545 is a multi-part standard, each part describes a specific test procedure or related matter.
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 1006, Building construction一Modular coordination一Basic module
ISO 10545-1, Ceramic tiles一Part 1: Sampling and basis for acceptance
ISO 10545-2, Ceramic tiles一Part 2: Determination of dimensions and surface quality
ISO 10545-3, Ceramic tiles一Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
ISO 10545-4, Ceramic tiles一Part 4: Determination of modulus of rupture and breaking strength
ISO 10545-5, Ceramic tiles一Part 5: Determination of impact resistance by measurement of cofficient of restitution
ISO 10545-6, Ceramic tiles一Part 6: Determination of resistance to deep abrasion for unglazed tiles
ISO 10545-7, Ceramic tiles一Part 7: Determination of resistance to surface abrasion for glazed tiles
ISO 10545-8, Ceramic tiles一Part 8: Determination of linear thermal expansion
ISO 10545-9, Ceramic tiles一Part 9: Determination of resistance to thermal shock
ISO 10545-10, Ceramic tiles一Part 10: Determination of moisture expansion
ISO 10545-11, Ceramic tiles一Part 11: Determination of crazing resistance for glazed tiles
ISO 10545-12, Ceramic tiles一Part 12: Determination of frost resistance
ISO 10545-13, Ceramic tiles一Part 13: Determination of chemical resistance
ISO 10545-14, Ceramic tiles一Part 14: Determination of resistance to stains
ISO 10545-15, Ceramic tiles一Part 15: Determination of lead and cadmium given off by glazed tiles
ISO 10545-16, Ceramic tiles一Part 16: Determination of small colour differences.BS ISO 13006 pdf download.