BS ISO 10474:2013 pdf free
BS ISO 10474:2013 pdf free.Steel and steel products一Inspection documents
Documentissued by the manufacturer declaring that the products supplied comply with the requirements of the order and in which test results are supplied from specific inspection.
The test unit and the tests carried out are defined by the product specification and/or the order.It shall be permissible for the manufacturer to transfer to the inspection certificate 3.1 relevant test results obtained by specific inspection on primary incoming products provided that the manufacturer operates traceability procedures and can provide the corresponding inspection documents required.The document shall be validated by the manufacturer’s authorized inspection representative,independent of the manufacturing department.
NOTE 1 In ISO 10474:1991, replaced by the current edition, the designation for this document is 3.1.B.
NOTE 2 In nations or districts where submission ofinspection certificate 3.1 B is specified in product standards,3.1 B instead of 3.1 can be used.
Document issued bythe manufacturer declaring that the products supplied comply with the requirements of the order and in which test results are supplied from specific inspection.
The test unit and the tests carried out are defined by the product specification and/or the order.It shall be permissible for the manufacturer to transfer to the inspection certificate 3.2 relevant test results obtained by specific inspection on primary incoming products provided that the manufacturer operates traceability procedures and can provide the corresponding inspection documents required.
The inspection certificate shall be validated by both the manufacturer’s authorized representative and the purchaser’s authorized representative or by an inspector designated by a third party.
All the inspection documents defined in this International Standard shall be validated by the person(s) responsible for this and their name(s) and position(s) shall be given. A signature is not required.
Additional information on copies (see Clause 6) shall be validated in the same way.The retention and transmission of documents shall be either in electronic data or paper format.BS ISO 10474 pdf download.
