BS EN ISO 4519:2016 pdf free
BS EN ISO 4519:2016 pdf free.Electrodeposited metallic coatings and re lated finishes
Unless otherwise specified in the contract or purchase order, the supplier shall be responsible for performing all the required tests for compliance with the specified inspection requirements, and the supplier may use his own or any other laboratory facilities suitable for performance of the inspection requirements. The purchaser shall have the right to perform any of the inspections detailed in the material document, when such action is deemednecessary to ensure that the electrodeposited metallic coating or the related finish conforms to the prescribed requirements. Reports of the test results shall be available for examination by the purchaser for 1 year from the date of acceptance of the material by him. Copies of the test reports and test details shall be furnished when required by the contract or purchase order.
The purchaser shall have the right to reject any unit of product found defective during inspection,whether that unit of product forms part of a sample or not, and whether the lot as a whole is accepted or rejected. With the approval of, and in the manner specified by the purchaser, rejected items may be repaired or corrected and resubmitted for inspection.
The supplier may be required at the discretion of the responsible authority to inspect every unit of the lot for critical defects. The right is reserved to inspect every unit submitted by the supplier for critical defects and to reject the lot immediately when a critical defect is found. The right is reserved also to sample, for critical defects, every lot submitted by the supplier and to reject any lot if a sample drawn therefrom is found to contain one or more critical defects.
Lots found unacceptable may be resubmitted for reinspection only after all items are re-examined or retested and all defectives are removed or the defects corrected. The purchaser shall state whether reinspection shall include all types or classes of defect, or only the particular type or class of defect which caused initial rejection.BS EN ISO 4519 pdf free download.